 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC24M00A Series THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION PC24M00A Series are low dropout regulators which have 500 mA capable for output current. These ICs are built-in the saturation protection circuit of the output transistor. FEATURES * Built-in the saturaiton protection circuit of the output transistor. * The capability of output current is 500 mA. * High accuracy of output voltage. | VO | 2 % (TJ = 25 C) | VO | 3 % (0 C TJ 125 C) * Low dropout voltage. VDIF 1 V (IO 500 mA, TJ 125 C) * Built-in overcurrent protection circuit, thermal shut-down circuit. * Built-in Safe Operating Area protection circuit. * Compatible for PC24M00 Series. CONNECTION DIAGRAM (TOP VIEW) 1 2 3 1 : INPUT 2 : GND 3 : OUTPUT ORDERING INFORMATION Output Voltage 5V 6V 7V 8V 9V 10 V 12 V 15 V 18 V Type Number Package MP-45G (Isolated TO-220) PC24M05AHF PC24M06AHF PC24M07AHF PC24M08AHF PC24M09AHF PC24M10AHF PC24M12AHF PC24M15AHF PC24M18AHF Document No. G10353EJ2V0DS00 (2nd edition) Date Published December 1995 P Printed in Japan (c) 1995 2 Start-up circuit Thermal shut down Reference voltage Drive circuit Over-current protection - + Error amplifier Safe operating area protection BLOCK DIAGRAM Saturation protection PC24M00A Series GND INPUT OUTPUT PC24M00A Series ABSOLUTE MAXIMUM RATINGS (TA = 25 C, Unless otherwise specified.) PARAMETER Input Voltage Internal Power Dissipation Operating Ambient Temperature Range Operating Junction Temperature Range Storage Temperature Range Thermal Resistance (Junction to Case) Thermal Resistance (Junction to Ambient) SYMBOL VIN PT TA TJ Tstg Rth(J - C) Rth(J - A) RATING 36 15 Note -20 to +85 -20 to +150 -55 to +150 7.0 65 UNIT V W C C C C/W C/W Note Internally limited. TYPICAL CONNECTION D1 INPUT CIN PC24M00A + OUTPUT COUT D2 CIN D1 D2 : 0.1 to 0.47 F. : Need for VO > VIN. : Need for VO < GND. COUT : More than 47 F. RECOMMENDED OPERATING CONDITIONS PARAMETER Input Voltage SYMBOL VIN TYPE NUMBER MIN. 6 7 8 9 10 11 13 16 19 0 -20 -20 TYP. 9 10 11 13 14 15 18 22 25 MAX. 20 21 22 23 24 25 27 27 28 500 +85 +125 mA C C UNIT V PC24M05AHF PC24M06AHF PC24M07AHF PC24M08AHF PC24M09AHF PC24M10AHF PC24M12AHF PC24M15AHF PC24M18AHF Output Current Operating Ambient Temperature Range Operating Junction Temperature Range IO TA TJ All All All 3 PC24M00A Series ELECTRICAL CHARACTERISTICS PC24M05A (VIN = 9 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 4.9 4.85 TYP. 5.0 MAX. 5.1 5.15 UNIT V 6 V VIN 20 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 6.5 V VIN 20 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 4.5 V, IO = 0 mA VIN = 4.5 V, IO = 500 mA mA 6.5 V VIN 20 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 6.5 V VIN 16.5 V IO = 500 mA, 0 C TJ 125 C VIN = 20 V VIN = 9 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 4.85 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 5 3 2.3 7 Start-up Current IBIAS(S) 5.15 50 25 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.75 55 90 60 0.5 0.6 1.0 0.2 10 Vrms dB 1.0 V A 1.63 A mV/C PC24M06A (VIN = 10 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 5.88 5.82 TYP. 6.0 MAX. 6.12 6.18 UNIT V 7 V VIN 21 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 7.5 V VIN 21 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 5.5 V, IO = 0 mA VIN = 5.5 V, IO = 500 mA mA 7.5 V VIN 21 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 7.5 V VIN 17.5 V IO = 500 mA, 0 C TJ 125 C VIN = 21 V VIN = 10 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 5.82 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 6 4 2.3 7 Start-up Current IBIAS(S) 6.18 60 30 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.75 53 110 58 0.5 0.6 1.0 -0.4 10 Vrms dB 1.0 V A 1.63 A mV/C 4 PC24M00A Series PC24M07A (VIN = 11 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 6.86 6.79 TYP. 7.0 MAX. 7.14 7.21 UNIT V 8 V VIN 22 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 8.5 V VIN 22 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 6.5 V, IO = 0 mA VIN = 6.5 V, IO = 500 mA mA 8.5 V VIN 22 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 8.5 V VIN 18.5 V IO = 500 mA, 0 C TJ 125 C VIN = 22 V VIN = 11 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 6.79 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 7 4 2.3 7 Start-up Current IBIAS(S) 7.21 70 35 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.75 52 130 57 0.5 0.6 1.0 0.4 10 Vrms dB 1.0 V A 1.63 A mV/C PC24M08A (VIN = 13 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 7.85 7.75 TYP. 8.0 MAX. 8.15 8.25 UNIT V 9 V VIN 23 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 9.5 V VIN 23 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 7.5 V, IO = 0 mA VIN = 7.5 V, IO = 500 mA mA 9.5 V VIN 23 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 9.5 V VIN 19.5 V IO = 500 mA, 0 C TJ 125 C VIN = 23 V VIN = 13 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 7.75 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 8 5 2.3 7 Start-up Current IBIAS(S) 8.25 80 40 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.74 51 150 56 0.5 0.5 1.0 0.8 10 Vrms dB 1.0 V A 1.62 A mV/C 5 PC24M00A Series PC24M09A (VIN = 14 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 8.82 8.73 TYP. 9.0 MAX. 9.18 9.27 UNIT V 10 V VIN 24 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 10.5 V VIN 24 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 8.5 V, IO = 0 mA VIN = 8.5 V, IO = 500 mA mA 10.5 V VIN 24 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 10.5 V VIN 20.5 V IO = 500 mA, 0 C TJ 125 C VIN = 24 V VIN = 14 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 8.73 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 9 5 2.4 7 Start-up Current IBIAS(S) 9.27 90 45 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.74 50 170 55 0.5 0.5 1.0 1.0 10 Vrms dB 1.0 V A 1.62 A mV/C PC24M10A (VIN = 15 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 9.8 9.7 TYP. 10 MAX. 10.2 10.3 UNIT V 11 V VIN 25 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 11.5 V VIN 25 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 9.5 V, IO = 0 mA VIN = 9.5 V, IO = 500 mA mA 11.5 V VIN 25 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 11.5 V VIN 21.5 V IO = 500 mA, 0 C TJ 125 C VIN = 25 V VIN = 15 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 9.7 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 10 6 2.4 7 Start-up Current IBIAS(S) 10.3 100 50 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.74 49 190 54 0.5 0.4 1.0 1.6 10 Vrms dB 1.0 V A 1.62 A mV/C 6 PC24M00A Series PC24M12A (VIN = 18 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 11.75 11.65 TYP. 12 MAX. 12.25 12.35 UNIT V 13 V VIN 27 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 14 V VIN 27 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 11.5 V, IO = 0 mA VIN = 11.5 V, IO = 500 mA mA 14 V VIN 27 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 14 V VIN 24 V IO = 500 mA, 0 C TJ 125 C VIN = 27 V VIN = 18 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 11.65 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 12 7 2.4 8 Start-up Current IBIAS(S) 12.35 120 60 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.73 47 230 52 0.5 0.4 1.0 0.7 10 Vrms dB 1.0 V A 1.61 A mV/C PC24M15A (VIN = 22 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 14.7 14.55 TYP. 15 MAX. 15.3 15.45 UNIT V 16 V VIN 27 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 17 V VIN 27 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 14.5 V, IO = 0 mA VIN = 14.5 V, IO = 500 mA mA 17 V VIN 27 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 17 V VIN 27 V IO = 500 mA, 0 C TJ 125 C VIN = 27 V VIN = 22 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 14.55 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 15 9 2.5 8 Start-up Current IBIAS(S) 15.45 150 75 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.72 46 290 51 0.5 0.4 1.0 1.6 10 Vrms dB 1.0 V A 1.6 A mV/C 7 PC24M00A Series PC24M18A (VIN = 25 V, IO = 350 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 17.64 17.46 TYP. 18 MAX. 18.36 18.54 UNIT V 19 V VIN 28 V, 5 mA IO 350 mA, 0 C TJ 125 C 5 mA IO 500 mA, 0 C TJ 125 C mV mV mA 20 V VIN 28 V 5 mA IO 500 mA IO = 0 IO = 500 mA mA VIN = 17.5 V, IO = 0 mA VIN = 17.5 V, IO = 500 mA mA 20 V VIN 28 V, IO = 500 mA 10 Hz f 100 kHz f = 120 Hz, 20 V VIN 28 V IO = 500 mA, 0 C TJ 125 C VIN = 28 V VIN = 25 V IO = 5 mA, 0 C TJ 125 C TEST CONDITIONS 17.46 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 18 11 2.5 8 Start-up Current IBIAS(S) 18.54 180 90 3.2 30 15 45 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 0.72 44 350 49 0.5 0.4 1.0 2.2 10 Vrms dB 1.0 V A 1.6 A mV/C 8 PC24M00A Series TYPICAL CHARACTERISTICS Pd - TA 20 VO - Output Voltage Deviation - mV +100 VIN = 9 V IO = 5 mA +50 VO - TJ ( PC24M05A) Pd - Power Dissipation - W 15 W ith In fin 10 ite He at 10 sin k 5 1.92 0 0 -5 Without Heatsin 50 k 100 85 C 150 -100 0 50 100 150 TA - Ambient Temperature - C TJ - Junction Temperature - C VO - VIN ( PC24M05A) 8 IBIAS - Quiescent Current - mA 7 VO - Output Voltage - V 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 IO = 0 mA 350 mA 500 mA 20 IBIAS(IBIAS(S)) - VIN ( PC24M05A) TJ = 25 C 10 IO = 500 mA IO = 350 mA IO = 0 0 0 2 4 6 8 10 VIN - Input Voltage - V VIN - Input Voltage - V 9 PC24M00A Series TYPICAL CHARACTERISTICS VDIF - TJ 1 IO = 500 mA VDIF - Dropout Voltage - V IOpeak - Peak Output Current - A IOpeak - (VIN - VO) 2 0.8 1.5 TJ = -20 C 25 C 0.6 1.0 0.4 125 C 0.5 0.2 0 0 50 100 150 0 0 5 10 15 20 TJ - Junction Temperature - C (VIN - VO) - Input Output Differential - V R*R - f ( PC24M05A) 80 TJ = 25 C IO = 350 mA R*R - Ripple Rejection - dB 60 40 20 0 10 100 1k 10 k 100 k f - Frequency - Hz 10 PC24M00A Series PACKAGE DIMENSIONS (Unit: mm) PC24M00AHF Series 3PIN PLASTIC SIP (MP-45G) 11 PC24M00A Series RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. TYPES OF THROUGH HOLE MOUNT DEVICE PC24M00AHF Series Soldering Process Wave soldering Soldering Conditions Solder temperature: 260 C or below. Flow Time: 10 seconds or below. Symbol REFERENCE Document Name NEC semiconductor device reliability/quality control system Quality grade on NEC semiconductor devices Semiconductor device mounting technology manual Semiconductor device package manual Guide to quality assurance for semiconductor devices Semiconductor selection guide Document No. IEI-1212 IEI-1209 IEI-1207 IEI-1213 MEI-1202 MF-1134 12 PC24M00A Series [MEMO] 13 PC24M00A Series No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11 |
Price & Availability of UPC24M12AHF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |